01 / MORE MOVEMENT
A small move. A big difference.
QuickSett mounts beneath the front binding. Release the lock using the controller, rotate your foot and find the position you need. Return to your riding position and check the lock before descending.

Skate without twisting your whole body
Turn your front foot closer to the length of the board while pushing with your free leg. A practical change on flat traverses and on the way to the lift.

Rotation when you need it
The mechanism changes the position of the front binding without taking your boot out. The manufacturer’s demonstration shows a 90° turn; use your chosen riding angle for the descent.

More freedom at the lift
Changing the position of your front foot helps you position the board while waiting and riding the lift. Choose a position appropriate to the conditions and the lift’s operating rules.

Your angle, in 3° steps
Adjustment in 3° steps lets you fine-tune your stance. Installation settings also depend on whether you ride Regular or Goofy and on your board’s insert system.
QUICKSETT COMPATIBILITY
Compatible brands
B2, F1, 01–02, 03–04 and S1 rings adapt QuickSett to different binding designs. The Step On configuration combines a B2 ring with an additional adapter. Origin 3.0 works with generation 2.0 and 3.0 rings.

The brand is only a starting point. The right ring depends on the exact model, model year and baseplate design — check them in the compatibility finder below.
Check compatibility ↓02 / COMPATIBILITY
Match the ring to the binding.
Choose your binding brand, model and model year. Search the full Black-Line checker, including bindings outside our shop. Type in any field to find an option faster.
Check your board too
Origin 3.0 supports 4×2, 4×4 and Channel with the correct installation. It excludes 3D inserts, mini-disc bindings, EST, aluminium baseplates, Skate Tech and splitboards. Black-Line does not guarantee compatibility with pre-2010 bindings.
Your bindings — 3 steps
Choose the model year. For the 2026/2027 season, choose 2027. If you are unsure, we can help identify it.
Your compatibility result
Select your bindings to check compatibility and find the required ring.
03 / YOUR QUICKSETT
Start with the right setup.
Origin 3.0 requires a matching generation 2.0 or 3.0 ring. Choose a complete kit or the no-ring option if you already own a compatible ring.
BLACK-LINE / QUICKSETT ORIGIN 3.0
QuickSett ORIGIN 3.0
Choose QuickSett without a ring or with a matching adapter ring. The Step On variant includes the B2 ring and controller adapter. Bindings are not included.
Unsure which ring to choose? Check your binding model first.PLN 599.90
04 / INSTALLATION & USE
Get to know it before your first run.
Watch the official ORIGIN 3.0 guide: start with the introduction, then select the installation for your board and binding. Follow this version’s instructions for screws, assembly order and locking checks.
QuickSett ORIGIN 3.0 installation
Open on YouTube ↗- 1
Check the binding model, board and matching 2.0 or 3.0 ring. For Step On, also prepare the adapter and correct screws. Specified Flow models require a separate mount that we do not currently sell.
- 2
Choose Regular or Goofy and the corresponding markings. Channel uses separate RCH/GCH positions. Set your riding angle.
- 3
Install the mechanism, ring and controller following the instructions. Adjust the cable so it moves freely without interfering with the binding.
- 4
Before descending, return to the riding position, check the mechanism is fully locked and check fasteners as directed in the instructions.
Installation markings
| Marking | Use |
|---|---|
| R | Regular / standard insert layout |
| G | Goofy / standard insert layout |
| RCH | Regular / Channel |
| GCH | Goofy / Channel |
See every detail.
Black-Line’s media show how the system works and how it is configured. Bindings shown in demonstrations are not part of the kit.

Example installation: strap binding

Example installation: Step On

Example installation: CLEW

Example installation: Supermatic
05 / GOOD TO KNOW
A few more good questions.
Do I need two QuickSett units?
The system is designed for the front binding. A standard kit contains one mechanism and one matched ring, rather than a set for both bindings.
Can I use any ring?
No. The ring adapts the mechanism to the construction of a particular binding. B2, F1, 01–02, 03–04 and S1 are not universal sizes. Check the model and season, and contact us if you are unsure.
Does a 2.0 ring fit ORIGIN 3.0?
Yes. Black-Line requires ORIGIN 3.0 to be used with a suitable generation 2.0 or 3.0 ring. The ring type must still match the binding model and year. Generation 1.0 rings are not listed as compatible.
What does a Step On setup require?
It requires the QuickSett mechanism, a B2 ring, controller adapter and the correct screws, including the trigger attachment. The Step On kit provides the configuration intended for that system. The standalone adapter is a replacement or additional part, not a complete kit.
Which QuickSett can I add to Flow bindings?
For Flow Fenix and Fuse, you can add QuickSett with an F1 ring. The add-on price includes the mechanism and ring. A separate controller mount is not part of this offer; check the model and year finder for installation requirements.
Does it work with every board?
Black-Line lists 4×2, 4×4 and Channel. The system is not intended for 3D inserts or splitboards. A Channel board does not make EST bindings compatible: that binding design is excluded. Check the board, binding and ring separately.
How fine is the angle adjustment?
The angle adjusts in 3° steps. The skating position differs from your intended riding angle. Return to the correct setting and check the lock before riding.
What if I change bindings?
Check the new model’s compatibility from the start. You may need a different 2.0 or 3.0 ring or an additional controller mount. Do not automatically reuse the previous model’s configuration.
My model is not listed. What next?
An absent listing neither confirms nor rules out compatibility. We need the full name, season, size and a photo of the baseplate. Models with unclear information require an individual check.
What does “Add QuickSett” include on a binding page?
When selected, the button adds your chosen binding variant and QuickSett with the matched ring. The displayed total covers these products. Leave it unchecked to add only the binding.


